Discrete Element Modelling (DEM) in Port Hedland

Flow assurance starts before construction begins

In Port Hedland, where plant infrastructure carries the weight of some of Australia’s highest-tonnage ore systems, reliability isn’t a luxury; it’s a baseline requirement. Every chute, bin, screen and transfer point must perform under load without compromise. When it doesn’t, the result isn’t a minor delay. It’s production loss, unplanned maintenance, and cost escalation measured by the hour.

That’s why Discrete Element Modelling (DEM) has become a standard tool for forward-thinking engineering teams. At Crush & Screen WA, we deliver DEM simulation to clients in Port Hedland to help them improve flow performance, identify risks early, and prevent costly shutdown surprises before they happen.

Although our consultancy is based in Perth, our work is grounded in the conditions faced by operators in Port Hedland and across Western Australia. We support site-based engineers, contractors, consultants and EPCMs delivering upgrades and new infrastructure across iron ore, lithium, magnetite and other high-volume commodities. Our approach is built on technical clarity, responsive delivery and practical outcomes.

Local simulation support for iron ore infrastructure

Port Hedland operations move more ore than anywhere else in the country. The wear patterns, loading behaviours and belt demands that come with that scale are unlike anything encountered in smaller plants. Chutes need to be geometry-accurate. Feed needs to be balanced. Discharge needs to be predictable. A single build-up zone in a bin or transfer point can affect the entire circuit.

DEM gives you the ability to test that system digitally before it’s built. Using high-resolution simulations based on actual ore properties, we help you assess how your material behaves as it interacts with the surfaces, slopes and impact zones of your plant.

This includes accurate modelling of stratification on screens, drop height impact on liners, material trajectory at belt transfer points, and discharge patterns in bins and hoppers. For operators in Port Hedland, it means fewer surprises after commissioning and greater control over performance variables that would otherwise need to be managed on the fly.

What we model and why it matters

We build simulation models around real material data, not estimates. This means the size distribution, flow rate, moisture level, and cohesion of your ore are captured in the simulation, not assumed. Once we know how the material behaves, we place it inside a model of your proposed plant geometry and simulate it under different operating conditions.

In many cases, this uncovers points of failure not seen in early-stage design. We highlight zones where flow stalls, velocity peaks, or material diverts in unintended ways. We provide insights into screen deck load imbalances, uneven stratification, or flow deflection that might compromise liner life or final product grading.

For upgrades in existing Port Hedland plants, DEM helps validate whether a new chute, diverter or bin geometry will solve the issue or simply move the problem downstream. For new infrastructure, it provides design assurance that helps reduce commissioning time and improves long-term plant reliability.

A simulation process built around your plant

Every DEM project begins with a conversation. We need to understand what you’re designing, what you’re upgrading, or what isn’t working the way it should. From there, we work with your existing files, whether that’s CAD drawings, site sketches, or vendor documents, and build a 3D simulation model that reflects the actual layout you’re working with.

Once the model is prepared, we run simulation scenarios that replicate not just steady-state flow, but the variability of real operations. That includes peak flow conditions, restricted discharge states, and variations in feed consistency. We then review the output internally and prepare a structured engineering report with all relevant visuals, observations and improvement recommendations.

Every report is reviewed with your team so the findings can be applied immediately. We also supply data in formats that integrate with your design software or documentation packages, including CAD-ready geometry, plant layout references, and simulation animations.

From simulation to site-ready improvement

A model on its own doesn’t improve your plant. The real value lies in translating simulation results into engineering outcomes. At Crush & Screen WA, we provide the support needed to turn simulation insights into design changes, component upgrades or layout improvements that deliver long-term value.

If your simulation identifies problems with velocity, wear, access or material build-up, we can work with your team to refine the geometry. That might mean adjusting a drop angle, improving discharge alignment, or reconfiguring flow to reduce impact. We provide technical input, engineering drawings and, where needed, component specifications to help ensure that any change made is grounded in both performance and practicality.

For shutdown teams and maintenance crews in Port Hedland, we also use DEM to improve safety and access outcomes. This includes identifying clean-out risks, assessing liner wear trends, and supporting planning for component isolation or change-outs.

20210829 183859

Engineering support for Port Hedland operations

Crush & Screen WA is a Perth-based engineering consultancy supporting materials handling projects across Western Australia. We’ve delivered structural audits, mechanical design input, DEM simulations and plant optimisation services to clients working throughout the Pilbara, including multiple projects in and around Port Hedland.

We work with owner-operators, consulting engineers, EPCM firms and site-based projects. Whether you’re working on a greenfield port facility, an inland crushing upgrade or a conveyor system tied to a load-out zone, we can help you model flow, understand failure risks and improve plant design without delay.

Our service is grounded in the realities of operating large-scale infrastructure in remote, high-tonnage conditions. We focus on practical advice, fast turnaround and clean handover to ensure your design, installation or commissioning phase is supported with the right information, not guesswork.

Confidence before the first belt turns

When production pressures are high and failure costs are measured in the thousands per hour, confidence in your design matters. DEM gives you that confidence by making plant behaviour visible and measurable before anything reaches the site.

Our simulation packages are scoped clearly and priced to reflect the complexity of your project. Smaller one-off models, such as individual transfer chutes, are quoted at the lower end of the range. Full circuit models, multi-path flows or design comparison simulations are priced based on geometry and data availability. Every project includes engineering input, a formal review process, and file outputs suitable for procurement or design validation.

If you’re based in Port Hedland and managing a plant upgrade, a new installation or a persistent flow issue that needs solving, our team is ready to help. We’ll scope the simulation to your needs, deliver it on time, and provide the insight required to move forward with confidence.

Get In Touch!
Download our Capability Statement

"*" indicates required fields

Scroll to Top